| |
Repsol Ibercut EDM-2
Translation of the original Spanish. In case of a discrepancy, the Spanish original prevails
Description and Recommendations
A very light fluid with high refining level, odourless, glossy and transparent. Specially formulated
for cooling, lubricating and separating the micro-chips that appear in spark erosion work. This product is suitable for steel honing. It is also suitable for use in gauging.
Properties
High ignition point and low volatility in applications allow it to be used without risk. Low toxicity in accordance with industrial hygiene requirements, both in relation to working environments and contact with the skin.Good transparency and light colour allow work areas to be easily seen.
Quality level
ISO 6743/7 category ISO-L-MHA
Technical characteristics
|
UNITS |
METHOD |
VALUE |
Appearance |
|
|
Transparent |
Density at 15oC |
g/ml |
ASTM D 4052 |
0,825 |
Viscosity at 40oC |
cSt |
ASTM D 445 |
3,3 |
Viscosity at 100oC |
cSt |
ASTM D 445 |
1,2 |
Flammability V/A |
oC |
ASTM D 97 |
115 |
Initial distillation point |
oC |
ASTM D 92 |
240 |
Pour point |
oC |
ASTM D 665 |
-30 |
Cu corrosion, 3hr at 100oC |
|
ASTM D 665 |
1b |
Overview
160 Kg cans.
Hazard identification
This product is classified as toxic to aquatic organisms. Likewise it is classified as harmful: may cause lung damage if ingested.
Handling
Minimum precautions should be taken to avoid prolonged contact with the skin. The use of gloves, visors or glasses is recommended to avoid splashes.
Health and safety risks.
Inhalation: Prolonged exposure to high concentrations of steam may cause irritation in the nervous system.Ingestion: May cause lung damage. Do not make an affected person vomit. Supply water. Get medical help.Contact with the skin: Wash thoroughly with soap and water.Eyes: Wash thoroughly with water.General measures: Get medical help.
Fire-fighting measures
Flammable/combustible material.Extinction: Foams, dry chemicals, CO2, water spray. Do not apply a jet of water directly, as it could spread the product.
Environmental precautions
The product is toxic to aquatic organisms. Danger of physical pollution if spilt (water, coastlines,soil, etc.). Prevent the material from entering the water supply.Decontamination and cleaning: Remove all sources of ignition (sparks, flames or smoking in affected areas). Small spills: Clean with sand or other absorbent material and deposit in containers for subsequent disposal. Large spills: Avoid dispersion using mechanical barriers and remove with physical or chemical elements.
|
|
